Recording a Podcast on GarageBand

by Posted on

I have been working on Macs my entire professional career and have found them to be wonderful for content creation due to their easy use, simple design and usually problem free operation. It was no issue for me then to select GarageBand to record and edit my podcast for two main reasons; (1) it has great features that are MADE for podcasting and (2) it’s free with a Mac!

I’m not going to list all of the nooks-and-crannies of how GarageBand works since the white-sheets for the program are extremely simple to understand. I will, however, explain the step-by-step process of recording, editing and exporting an audio podcast with GarageBand and mention some pitfalls.

Organizing your files

Using GarageBand will mean that you will be producing at least two different files for each of your podcast episodes; (1) your actual GarageBand project file that is used for saving and editing your podcast and (2) your exported audio file ready for distribution. Personally, I like to place all of my GarageBand project files in a folder titled “GarageBand” and all of the exports into a folder named “Episodes”. Right now, the Ask Adam League distributes episodes primarily, but for other content that is different than an episode I like to save those files in a different folder.


This organization is critical because the more content you produce, the more files you are going to have to sift through if (and when) you have to go back. This was the case with the Ask Adam League when we began moving our episodes over to YouTube. All of the GarageBand files needed to be accessible so we could re-export them to an AAC format for video distribution. So just make sure that whatever system you use, you develop something that works for you and is future-proof.

One last tip for file organization in GarageBand. I like to use a template project file so I am setting the parameters and effects for the recording only once. This helps save time and create consistency between episodes. The easiest way to do this is to save a GarageBand project file that is your master template with all of the saved parameters. Open this file each and every time you record a new episode. When you are done recording select File>Save As in the pulldown menu and save a new project file.

Recording

GarageBand is a very simple program, as many Apple produced applications are, and it’s even easier for people who have experience in video or audio editing. I’ll go through the basic process of recording on GarageBand.

The first thing you need to do when beginning to record for GarageBand is set up a template project that will be your standard recording project that can be duplicated and saved for all of your podcast episodes.

Open GarageBand, select File>New in the pulldown menu, select New Project>Podcast and select “Choose”.

You will be prompted to name your GarageBand project file (the extension is .band) and a location on your hard drive to save the file. Don’t worry about the tempo, signature or key parameters at the bottom.

A brand new project will be opened and ready for podcast recording. There will be a few things that you would like to change before recording at this point however.

Make sure to name your tracks according to who they will be assigned to. I always assign Adam to the first track and myself to the second. Just click the name field and you’re on your way to editing the name.

It’s time to do some alterations to your tracks. GarageBand will put certain parameters at default.

Highlight the track you want to edit and select the “I” or information button at the bottom right of the software to reveal track info. Make sure that the “Browse” tab is activated as well. You are ready to edit your selected track. Select the Input Source pulldown to whatever device you will be using (mainly a microphone but you can do several things like record with other people over Skype which I will mention in a later post). For the best audio recording scenario you will want to select the input for each of your talent so you can have separate recordings on each track. It makes it a LOT easier to edit in post. Monitor basically indicates whether you want to actually hear the sound from that particular track in your monitoring device (speakers or headset). For a simple two person podcast you will want to turn the monitor “on” for anyone you want to hear and “off” for the track that is assigned to the operator of the software. Recording level is the level which the track is recorded at. Also, you can select different icons if you want to be cute. I certainly don’t need a female icon representing me on the second vocal track.


GarageBand applies some filters to the tracks by default that will need to be adjusted. To change these, click the “Edit” tab to activate the edit functions. Both the male and female tracks will have effects applied to each with varying differences within each effect. The difference between the effects in the male and female vocals are significant so make sure that you adjust the effects if you use them in your final mix. I turn off ALL of these effects during recording by clicking their respective blue buttons. You can have these filters active while recording and it will make no difference in the raw recording if you have them active or not; I like to have naked audio coming in and know that I will be able to adjust them later.

The Master Track, which defines any adjustments to all the tracks also has some setting by default. Highlight the “Master Track” tab at the top right of the interface and you will see the activated Track Effects in the “Edit” tab. You can go ahead and turn these off.

Rinse and repeat for both (or more) vocal tracks.

Ducking is an audio effect where selected tracks can be dominant or be submissive to other tracks. The best example is talk radio when the host is talking over a caller. The caller’s audio suddenly drops automatically when the host is speaking. “Up” means the track has precedence over the others and “Down” means that the track is submissive and will “duck” out it’s audio. I turn all these off in recording but you can leave them on if you wish.

Lastly, you are going to want to enable recording for the tracks that you want to be recorded. This is done by clicking the “enable recording” button. If it’s red then the track will be recorded.

After that all you need to do is set your playhead to the location that you want to record at and then hit the big red record button.

Editing

Editing is extremely simple in GarageBand. The setup above describes a two person audio recording with separate channels allowing for the best audio editing scenario. Separate channels means that audio effects and editing can be isolated to each source. Two other tracks exist; the podcast track at the top (this is only necessary for advanced podcasts which is beyond the scope of this post) and a jingle track. The jingle track is a track where you can import music of your own or from the GarageBand sound library. I recommend that if you want music in your podcast that it be inserted in post so you can control the audio level, fade-ins and fade-outs.

There are several ways to edit sound in GarageBand and all of them can be found in the manual, however, I will explain in brief a few principles that are the most used. If you want to chop the ends off of tracks or simply split a track, place the playhead over the section you want to make a split, select the channel you wish to split and pres “command + T” or you can use Edit>Split in the pulldown menu. This will split the clip and allow you to trim the clips using the drag points at the end.

There will also be the time where you will need to adjust the volume levels of certain tracks over time. Say that you start with a significant level of your jingle track and you want to ramp it down when the voice of the talent comes in. GarageBand allows you to keyframe the volume level over time for individual tracks. To do this click the downward triangle below the track name, this is the automation button.

By default, the Track Volume function will be available. (There is a pulldown for track pan as well but we’ll just focus on the volume level). Click the grayed out button to the left of the Track Volume indicator and the key-frameable volume control band will appear in blue.

Now you can easily ramp up and down the volume control for any track. Just click on the blue line to create a keyframe which can be used as a node to control the volume over time. From  this image you can see that the volume of the jingle track comes in strong and then dips down lower (but not fully out) as the talent’s track comes up to intro the show. After a bit, the jingle track slowly fades out.

To adjust the overall volume of the audio in your project, you can enable the Master Track by going to Track>Show Master Track in the pulldown menu. You can adjust the volume with key-framing just as the individual tracks.

Exporting

Exporting a podcast is very simple. There are two types of exports that you can do (1) is for a standard audio podcast and (2) is for an advanced podcast which has chapter and image capability (I will cover this in another post).

For exporting a standard podcast click Share>Export Podcast to Disk in the pulldown menu. A prompt will appear for setting the exporting parameters.

The Ask Adam League is a half hour all vocal podcast, except for some bookended music, so it doesn’t need to have a high end sampling rate. For an all vocal podcast of this length, what’s worked for me is going with the MP3 encoder and 128 VBR. Any compression that is taking place is practically unnoticeable at this bit rate and compression algorithm.

On the Compress Using pulldown, select MP3 Encoder. For the Audio Settings select “Custom”.  You’ll have another prompt come up. 128 kbps (kilobytes per second) is just fine for a vocal podcast, anymore is just overkill unless you have a lot of music on your podcast and supreme quality is needed for that music. I always go with VBR quality as the “Highest”. Variable Bit Rate will automatically adjust the bits per second on the encoding of your podcast based on the “like” sound around it. CBR or Constant Bit Rate will have the same bit rate all the way through the podcast. So if you have VBR set as “Highest” like I do, GarageBand will automatically adjust the bit rates throughout your podcast saving space on your hard drive, your server and will make for quicker downloads for your listeners. For Channels, set it to “Mono” unless you have a LOT of music on your podcast and you really need your listeners to hear the nuances of the left and right channels of a song. But for a spoken podcast all you need is mono. It will help cut down on the size of your file as well. I always check Filter Frequencies Below 10Hz to knock out any annoying low-end sound that might be around. But I haven’t noticed a difference between it being enabled or not.

Pitfalls

  • Make sure that your record indicator is red when recording on ALL the tracks you want recorded. If not, then you wont be recording everything.
  • Save regularly! A system crash, program freeze, user error or any number of problems can occur and if you’ve spent some time cutting your project without saving then you can set yourself back a lot of time. Save right after you are done recording as well.
  • Test record before you do your master record; every time. You’d hate yourself if you started recording and realized that the talent or host’s mic wasn’t recording or there is some other issue at hand.
  • Make sure your audio is consistent between all of your channels. If your host is considerably louder than your talent, then your listeners will have a hard time focusing on your content.

Published by Donald Sinatra

1,005 Replies to “Recording a Podcast on GarageBand”

  1. Pingback: Recording a Podcast with Skype and GarageBand for Free | Donald Sinatra

  3. I’m trying to use an intro song, but then about 15 seconds in I start talking. I want to “duck” the song about 2 seconds before I start talking.

    I just started using GB, so could you maybe tell me how this is done?

    Thanks a lot!

  4. Hey Chris. Thanks for the question and thanks for the plug on Twitter.
    I record my audio and then edit the sound in post so my process doesn’t include any live recording. But you can use the steps I talk about below, ahead of time, so you can dip your audio during a live recording if that’s what you want.
    So, you can adjust the volume levels with keyframes with each track. I’m using Garageband 09 and if you are using a different version it might not be the same. In 09, if you click the downward arrow that is on each track it will show the track volume and pan curve (it defaults to volume). If you click it you will expand that particular track to include your volume control and it will appear as a blue line across your track. Now you can simply click anywhere on the blue line to create a keyframe which is a node where you can adjust the volume level over time throughout your project. So make the shelf high for your music track and then drop when your voice track comes in. You can use as many keyframes as you want to create smooth transitions.
    I would normally link to pictures and videos but unfortunately I’m at Starbucks which has some pretty atrocious wifi right now. There are some pretty nice videos on Apple.com that provide some helpful beginner info as well.
    Best of luck!

  6. Hi Donald this is great information (and I can’t wait to start podcasting once I’ve ironed out a few issues) and I came here from your other article about making podcasts for free.

    Just a few questions please.

    I set everything exactly how you asked, but:

    I can’t hear people when I use Skype anymore, they can hear me though. Naturally I’ve done something, but I don’t know what.

    When I have run through a test podcast. I can get the other person in fine into GarageBand, but I can’t record myself onto a separate track, multitrack is enabled and the bars go up when it hears my voice. But once I hit record everything records onto one track.

    The one track isn’t a massive deal until on playback my voice is much lower than the other person’s. Again I’ve made sure all the settings for us both are the same so again I can’t figure this out.

    Hope you can help thank you again.

    When my podcasts are up and running I will be sure to point traffic your way with plenty of mentions.

  8. Thanks for the detailed post, Donald. I just found it the other day and used this one and your post about recording through Skype. It worked great.

    However, I was wonder if you ever ran into this problem: I recorded myself and another person over Skype last night into Garageband. I played the tracks back and yep, we were both there. I saved the file and shut down my computer. Today when I sat down to edit and export the podcast, suddenly Garageband said the audio files were missing!

    Any ideas?!

  11. Hello Web Admin, I noticed that your On-Page SEO is is missing a few factors, for one you do not use all three H tags in your post, also I notice that you are not using bold or italics properly in your SEO optimization. On-Page SEO means more now than ever since the new Google update: Panda. No longer are backlinks and simply pinging or sending out a RSS feed the key to getting Google PageRank or Alexa Rankings, You now NEED On-Page SEO. So what is good On-Page SEO?First your keyword must appear in the title.Then it must appear in the URL.You have to optimize your keyword and make sure that it has a nice keyword density of 3-5% in your article with relevant LSI (Latent Semantic Indexing). Then you should spread all H1,H2,H3 tags in your article.Your Keyword should appear in your first paragraph and in the last sentence of the page. You should have relevant usage of Bold and italics of your keyword.There should be one internal link to a page on your blog and you should have one image with an alt tag that has your keyword….wait there’s even more Now what if i told you there was a simple WordPress plugin that does all the On-Page SEO, and automatically for you? That’s right AUTOMATICALLY, just watch this 4minute video for more information at. Seo Plugin

  16. Il aurait également la particularité de réduire le temps de
    séchage, diminuant ainsi le risque de fragiliser les cheveux.Vendu en septembre en FranceLe prix
    est à la mesure de l’innovation puisque la marque anglaise, se situant dans le
    haut de gamme de l’appareillage électroménager, commercialise son « Supersonic » à 399 euros, en model rose ou blanche.

  18. I liҝe this wеb bⅼog so much, saved to mmy booҝmarks.

    “Nostalgia isn’t what it used to be.” by Petеr De Vries.

    Feel free to surf too my website – MacFÉ‘rlane Group (Alfonzo)

  29. While the bank or credit score union you bank with might
    offer you a very good rate of interest and friendly
    service, it could be in your best curiosity to shop round a little as a result of interest rates for private loans can differ.

  31. I’ѵe learn several good stuff here. Certainly pricе bookmarкing forr
    revisiting. I wonder how mᥙch attemρt yⲟuu put to create this kind of
    fantastic informative weeb site.

    Feel free too visit my site – einnews.com; Carey,

  33. Os maiores benefícios do consumo da Goji Life são relacionados ao seu efeito antioxidantes para aqueles que querem evitar
    um envelhecimento precoce das células do corpo, para aqueles que desejam emagrecer ou ainda melhorar a sua
    imunidade.

  34. I want to to thank you for this excellent read!! I certainly loved every bit
    of it. I have you bookmarked to look at new things you post?

  35. It also signifies that there will be some titles available which are
    hard to find and many that even a skilled gamer could have never heard
    of. If the child subscribes to be able to Roblox and also brings about being the member, they might in addition have arms, legs, and
    in addition torsos which might be made plus designed due to the company understanding that will surely differentiate their character types
    through non affiliates exactly who continue to have use of almost all a few other popular features of this package.
    As well built-in inside the most essential flight simulator
    downloads, you will find just one available today craft like a Zeppelin, various helicopters, also even perhaps a UFO.

  39. Fantastic beat ! I would like to apprentice at the same time as you amend your site,
    how could i subscribe for a blog web site? The account aided me a acceptable deal.

    I have been a little bit acquainted of this your broadcast provided vivid clear idea

  41. You actually make it seem so easy together with your presentation but I find this topic to
    be actually one thing which I feel I would by no means understand.
    It seems too complicated and extremely wide for me. I
    am looking forward for your subsequent post, I will try to
    get the dangle of it!

  42. It was simply a matter of time before an enemy as insidious (something some
    thing Darth Sidious joke) as the Empire of the Starwars films began to invade the real world.

    Review my page – watch rogue one online (Floy)

  44. Hello there! This article couldn�t be written any better!
    Reading through this post reminds me of my previous roommate!
    He constantly kept talking about this. I’ll send this post to him.
    Fairly certain he’s going to have a good read. Thanks for sharing!

  45. Pretty nice post. I just stumbled upon your blog and wished to say that I’ve
    really enjoyed surfing around your blog posts. After all
    I will be subscribing to your rss feed and I hope you write again very soon!

  46. So there you will have it, that simple growth beach online hack takes actually minutes to complete, and better of all it requires no downloading or
    using of any software.

  49. Hey just wanted to give you a quick heads up and let you know a few
    of the images aren’t loading correctly. I’m not sure why
    but I think its a linking issue. I’ve tried it in two different browsers and both show the same results.

Leave a Reply